Your agricultural
parts connection

Clamping Shaft Collars

All EPT shaft collars, including quick-clamping collars, are solo point faced to ensure perpendicularity and proper alignment. This critical manufacturing stage assures specific shaft cast aluminium china collar face to bore relationship leading to correct part positioning on the shaft and actually pressure on interfaced elements.
Quick-clamping shaft collars from EPT are manufactured from high quality light weight aluminum with type-II sulfuric anodized finishes, with a black finish upon the collar and a precious metal finish in the clamping lever for added visibility. Aluminium collars are corrosion resistant, lighter than various other metals, have low inertia and have non-magnetic properties. All EPT goods will be RoHS and REACH compliant. Available typical sizes for the quick-clamping shaft collars happen to be 0.375” to at least one 1.5” in the in . series and 8 mm to 38 mm in the metric series.
This EPT two-piece clamping shaft collar is constructed of black oxide steel. This is a two-piece clamping shaft collar for applications needing a more robust holding power and larger axial load ability than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing assembly or repositioning everywhere on the shaft without disturbing existing parts. It accommodates a larger variety of shaft diameters than setscrew collars and works well on both hard and soft shafts. It is manufactured from metal for weldability and rust level of resistance with a dark oxide complete for a attractive appearance and level of resistance to white corrosion, chipping and flaking, and stick-slide of the screw during torqueing, bettering the collar’s grip on the shaft. Black oxide also provides moderate corrosion resistance and superior lubricity. This collar includes forged socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range between -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is ideal for use in a variety of applications, including in the car industry to situate pieces in automobile electrical power steering assemblies, the production industry to locate components on a conveyor belt program, and the hobby craft sector to hold tires on axles in handy remote control vehicles, among others.
Allows assembly / disassembly on / off the shaft with no need to remove other ancillary pieces. Clamps firmly in place when tightened to the shaft. Ideal for positioning factors such as for example bearings or sprockets onto shafts.
The positioning is easily adjusted when fitted onto a shaft. Clamps firmly set up once tightened to the shaft. Perfect for positioning parts such as for example bearings or sprockets onto shafts.
The twice split shaft collar manufactured from steel browned (clamp collar) is easy to install. The shaft collars usually do not destruction the shaft. They are also insensitive to exterior forces and vibrations and distribute the positioning forces evenly over the whole shaft circumference.
Clamp-style and arranged screw shaft collars from Grainger could be indispensable to power transmission. They can maintain bearings and sprockets on shafts, situate pieces in engine and gearbox assemblies and provide as mechanical stops. A two-piece clamping shaft collar can certainly wrap around a hard or delicate shaft without marring. Placed screw collars work with a cup point socket establish screw to lock onto a gentle or predrilled shaft.

The collar clamping mechanism works quickly and successfully with simple side opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the external surface of the collar. The design of the cam on the lever and the mating machined surface on the collar assure a tight fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N according to the collar bore size. In conditions where higher holding vitality can be or clamp axial load is required, the quick-clamping collar isn’t the recommended choice. EPT offers a complete line of industry-leading one-piece and two-part shaft collars designed for these applications.

Contacts

Get In Touch

Interested in our products? Need some technical support? Just have a few questions? Feel free to contact us.

[contact-form-7 id=”57″ title=”Contact form 1″]
X

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.