Your agricultural
parts connection

Clamping Shaft Collars

All EPT shaft collars, including quick-clamping collars, are solo point faced to make sure perpendicularity and proper alignment. This critical manufacturing step assures exact shaft collar encounter to bore relationship leading to correct aspect positioning on the shaft and possibly pressure on interfaced factors.
Quick-clamping shaft collars from EPT are made of high Clamping Shaft Collars quality lightweight aluminum with type-II sulfuric anodized finishes, with a dark finish about the collar and a gold finish about the clamping lever for added visibility. Light weight aluminum collars are corrosion resilient, lighter than different metals, possess low inertia and also have non-magnetic properties. All EPT goods will be RoHS and REACH compliant. Available standard sizes for the quick-clamping shaft collars happen to be 0.375” to at least one 1.5” in the inch series and 8 mm to 38 mm in the metric series.
This EPT two-piece clamping shaft collar is constructed of black oxide steel. This is a two-piece clamping shaft collar for applications requiring a more robust holding power and bigger axial load ability than setscrew or one-piece clamping collars. The two-piece style separates into two halves, allowing set up or repositioning everywhere on the shaft without disturbing existing ingredients. It accommodates a greater selection of shaft diameters than setscrew collars and works well on both hard and very soft shafts. It is made of metal for weldability and rust level of resistance with a dark-colored oxide finish for a decorative appearance and resistance to white-colored corrosion, chipping and flaking, and stick-slip of the screw during torqueing, enhancing the collar’s hold on the shaft. Dark oxide also provides slight corrosion resistance and much better lubricity. This collar comes with forged socket-mind cap screws for securing the collar onto the shaft. The working temperatures because of this collar range between -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is suitable for use in a variety of applications, which include in the auto industry to situate elements in automobile electricity steering assemblies, the production industry to locate pieces on a conveyor belt system, and the hobby craft industry to hold wheels on axles in remote control vehicles, among others.
Allows assembly / disassembly on / off the shaft with no need to eliminate other ancillary pieces. Clamps firmly set up when tightened to the shaft. Ideal for positioning components such as bearings or sprockets onto shafts.
The position is easily adjusted when fitted onto a shaft. Clamps firmly set up when tightened to the shaft. Perfect for positioning elements such as for example bearings or sprockets onto shafts.
The double split shaft collar made of steel browned (clamp collar) is simple to mount. The shaft collars do not harm the shaft. Also, they are insensitive to external forces and vibrations and distribute the retaining forces evenly over the complete shaft circumference.
Clamp-style and arranged screw shaft collars from Grainger could be indispensable to power transmission. They are able to hold bearings and sprockets on shafts, situate pieces in motor and gearbox assemblies and provide as mechanical stops. A two-part clamping shaft collar can simply wrap around a difficult or soft shaft without marring. Set screw collars employ a cup stage socket placed screw to lock onto a smooth or predrilled shaft.

The collar clamping mechanism works quickly and proficiently with simple palm opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer surface area of the collar. The look of the cam on the lever and the mating machined surface area on the collar assure a good fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N depending on the collar bore size. In circumstances where higher holding vitality is or clamp axial load is required, the quick-clamping collar is not the recommended decision. EPT offers a finish line of industry-leading one-part and two-piece shaft collars designed for these applications.

Contacts

Get In Touch

Interested in our products? Need some technical support? Just have a few questions? Feel free to contact us.

[contact-form-7 id=”57″ title=”Contact form 1″]
X

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.