Why Coupling Grease?
Adequate lubrication is vital for satisfactory gear coupling operation. Gear Coupling Grease is especially intended for gear coupling applications to improve coupling daily life even though significantly lowering maintenance time. Its large viscosity base oil and tackifier combine to help keep the grease in spot and protect against separation and it truly is in complete compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in color and produced which has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to large centrifugal forces normally uncovered in couplings. Bearing or basic function greases tend to separate and eliminate effectiveness resulting from large centrifugal forces around the several ingredients at higher rotational speeds. These substantial centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication characteristics, accumulate while in the gear tooth mesh area leading to premature coupling failure. Gear Coupling Grease is intended to hugely resistant to centrifugal separation of the oil and thickener, which will allow the lubricant to become applied for a comparatively lengthy time period of time.
One of several techniques towards the achievement of Gear Coupling Grease would be the variable consistency through the entire functioning cycle of the application. The consistency of our gear coupling grease adjustments together with the operating problems. Operating from the lubricant underneath actual service conditions causes the grease to come to be semi-fluid, functionally solash lubricating the dress in surfaces of your coupling. Because the grease cools, it returns on the authentic consistency, therefore preventing leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, one lb. and 5 lb. cans.
Minimizing of coupling put on
Resistance to water washing
Corrosion and rust protection
Substantial load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in area underneath higher speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.
Why Coupling Grease?