Your agricultural
parts connection

Deep Groove Ball Bearing

Bearing with a riveted stamped metal cage
Filled up with a polyalkylene glycol/ graphite blend for lubrication
Running-in period required to distribute the lubricant within the bearing for applications that stand idle for a long period
Not for wet or humid environments
Single-row, pre-lubricated, ordinary accuracy.
Deep Groove Ball Bearings happen to be just about the most trusted rolling bearings. They are used to support radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Metal (GCr15) made out of heat treating, provides high and uniform hardness, very good wear resistance, and great contact fatigue performance.
Suitable for all types of industrial equipment, micro motor, tiny rotary electric motor, office equipment etc.
Cages – Variety of cage types to fit your application needs: steel, sturdy brass or polymer
TOP QUALITY Steel – Ultra clean metal designed to extend bearing life simply by up to 80%
Advanced Grease Technology – NSK lubricants designed to extend grease lifestyle and improve bearing performance
Super Finished Raceways – Specially honed to reduce noise and increase the grease distribution
Patented Seals – Give a barrier to contamination in tough environments.
Electrically insulated ball bearings available
Outer diameters up to 2500 mm
This type of ball bearing it often the most famous as a result of its versatility. They will be well suited for high speeds and may handle an excellent radial load ability, all will very little maintenance required.
“Deep Groove” refers to the race (the groove where in fact the balls relax). There is for that reason a larger space between the inner and outer bands, compared to the diameter of the ball. This leaves space for the rubber seals.
The purpose of a ball bearing is to look for the relative position of two parts (usually the shaft and the bearing casing) and also to ensure their free rotation while transmitting the load between them. At large rotational speeds (for example in gyro ball bearings), this application can be extended to include free rotation without practically don in the bearings. To do this, the two elements of the bearing could be separated by a level of adhesive fluid film called an elastic hydrodynamic lubricating film. pointed out that flexibility can be maintained not merely when the bearing bears the strain on the shaft, but as well when the bearing is definitely preloaded so that the positioning accuracy and balance of the shaft does not exceed 1 microin or 1 nanoin. Hydrodynamic lubricating film.
Deep groove ball bearings mainly consider radial load, but can also support radial and axial load. When the simply radial loads, the contact angle is zero.
When the deep groove ball bearings with a more substantial radial clearance, with angular speak to bearings can bear large axial load, deep groove ball bearing friction coefficient is tiny, the speed limit can be high.

Solo row deep groove ball bearings happen to be manufactured as start type (unsealed), sealed and shielded, the most used sizes of deep groove ball bearings will be also stated in sealed versions with shields or get in touch with seals on one or both sides, the bearings with shields or seals in both sides will be lubricated forever and are free of maintenance. A sealed bearings seals has got speak to on the bearings inner and external, a shielded bearings shield provides contact on the outer simply, and Shielded bearings happen to be primarily intended for applications where in fact the inner band rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at huge speeds.
Double-row Deep Groove Ball Bearing own deep uninterrupted raceways and great conformity between the balls and raceways.
They could carry axial loads acting in both directions furthermore to radial loads.Twice row deep groove ball bearings will be
very well suited for bearing arrangements where in fact the load carrying ability of a single row bearing is inadequate. For the same
external and bore diameters, twice row bearings are a little bit wider than single row bearings but have considerably higher load
carrying capacity than one row bearings in the 62 and 63 series.
EPT deep groove ball bearings for extreme temperatures correspond in design and style to standard one row deep groove ball bearings of the same size. They haven’t any filling slots and may accommodate usual axial loads furthermore to radial loads. The radial internal clearance is definitely a multiple of C5 to prevent the bearings from seizing, even though they cool speedily. All floors of the bearing and shields are manganese phosphated to improve adhesion of the lubricant to the steel and provide additional security against corrosion.

Contacts

Get In Touch

Interested in our products? Need some technical support? Just have a few questions? Feel free to contact us.

[contact-form-7 id=”57″ title=”Contact form 1″]
X

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.