Your agricultural
parts connection

Drive sprocket

A chain and sprocket travel is a type of power transmission in which a roller chain engages with several toothed wheels or sprockets, used in engines as a drivefrom crankshaft to camshaft.
Ever-vitality is proud to inventory a wide collection of Sprockets along with our huge selection of agriculture, gardening, preparing and outdoor products. We stand behind all 26,000 items we sell with this Satisfaction Guarantee. CUSTOMER SUPPORT is the cornerstone of us business, and has recently been for over 50 years.
Application
Ever-power travel sprockets provide rugged, reliable service and show replaceable tooth plates for easy field repair. Tooth plates for 102 and 142 series chain are available with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL in addition to the 175 and 260 series use our non-symmetrical profile.
Drive sprockets weren’t always made to be bolted on. At one time they were welded onto the final drive motor and had to be lower off if they were replaced. Ultimately, welded-on adapters were set up that allowed the sprocket to end up being bolted on, and more modern designs utilize the bolted approach altogether.
When someone sends in a final drive motor for all of us to take a look at or?rebuild/reman, we advise them to remove the sprocket. We don’t need the sprocket in destination to evaluate the electric motor and the added weight (which can be significant) unnecessarily improves your shipping costs.
Signs of Sprocket Wear
The teeth on a drive sprocket are where you search for wear . They must be tall and toned at the end, not sharp or dished by the end. And the sprocket, and even more specifically its teeth, commence to wear, its diameter becomes scaled-down. This causes what is referred to as a pitch mismatch, where the tooth on the sprocket no more connect to the track backlinks as effectively. This can accelerate the put on of the sprocket and reduce the sprockets efficiency of your gear.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or begins to negatively affect the performance of your final drive electric motor.
Preventing Sprocket Wear
One of the key methods to prevent accelerated sprocket wear is to check on the track tension. If the tension is too tight, it will cause wear on the sprocket the teeth. We’ve talked before about the importance of keeping the undercarriage clean, and the health of the undercarriage can affect the track tension (especially if there is a build-up of dried mud and debris). That’s part of the purpose we put so very much emphasis on keeping the undercarriage clean
Conclusion
Without a functioning drive sprocket, your track drive won’t be able to propel your equipment. Fortunately, there are ways to help your travel sprocket last longer: keep the track stress at a proper level and hold your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track machine ought to be inspected regularly. If you find early wear or damage to your tracks, a worn sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the following Bobcat Compact Monitor Loaders: T180, T190, T550, T590
Parts can vary depending on your serial number.
All Ever-ability sprocket tooth profiles are induction hardened to 55 Rockwell C., and so are replaceable. The substitute and maintenance of tooth plate segments does not require removal of the travel shaft, bearings, etc. Ever-power also designs customized split hub components for retrofit applications that minimize field labor costs.
At first glance, you might feel that if you’ve seen one travel sprocket, you’ve seen them all. However, Ever-ability has added an I.D. lip and spiral band that captivate the needle bearing along with an exterior snap ring that boosts performance and dependability. While simple to overlook, it’s this focus on depth that the racer offers come to expect from Ever-power.
An I.D. lip and spiral band that captivate the needle bearing
External snap ring caps sprocket on drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard

Contacts

Get In Touch

Interested in our products? Need some technical support? Just have a few questions? Feel free to contact us.

[contact-form-7 id=”57″ title=”Contact form 1″]
X

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.