Your agricultural
parts connection

DUMP TRAILER Power UNIT

DUMP TRAILER Power UNIT- SINGLE ACTING
Standard Description
This electrical power unit has a electrical power up gravity down circuit. Start out the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve is usually presented if essential. Also a stress compen sated movement manage might be extra for the circuit to manage the descent pace on the cylinder.
Remark: Please consult our income engineer for that unique pump displacement, motor power or tank capacity.
Particular Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic parts concerned in advance of installation of the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which really should also be clean and totally free of impurities.N46 hydraulic oil is advisable.
four. The power unit really should be mounted horizontally.
five. Check the oil level during the tank after the initial running from the electrical power unit.
six. Oil transforming is needed immediately after the original 100 operation hours, afterwards once every 3000 hrs.

DUMP TRAILER Energy UNIT-DOUBLE ACTING
Basic Description
This energy unit features a power up energy down circuit with load holding on each A & B ports. A strain compensatred flow manage is often additional to circuit to regulate the decent pace of your cylinder.
Particular Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean the many hydraulic elements concerned just before set up of the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which ought to also be clean and totally free of impurities. N46 hydraulic oil is proposed.
4. The power unit really should be mounted horizontally.
5. Check the oil degree within the tank soon after the original operating on the energy unit.
six. Oil shifting is required just after the initial 100 operation hours, afterwards as soon as every single 3000 hrs.

Contacts

Get In Touch

Interested in our products? Need some technical support? Just have a few questions? Feel free to contact us.

[contact-form-7 id=”57″ title=”Contact form 1″]
X

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.