Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Air flow Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric engine, capacitor and quickness control change is still hooked up nevertheless the cord itself is normally detached as seen in the photos. (Discover “Control Notice” below for alter type.)
T (See “App Notice” below for make use of in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw even. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric fan motor china electrical motor) is Clockwise.
Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine just as (but you have a rotating knob and you possess a pull-chain). If you order several electric motor at the same time, we can do our better to supply your purchase with each one sort of control or the excess.
Application Note: Do NOT use this electric engine in a nonfan app. This is a completely enclosed fan electric motor and designed to have constant ventilation over the motor casing for cooling. The casing isn’t vented and the electrical electric motor will overheat and get into automated thermal overload if run in a nonfan system where there isn’t solid ventilation past the engine. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the motor and cause it to proceed into automated thermal overload. (Your companion blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric engine is produced in China.