Your agricultural
parts connection

greenhouse gear motor

• Electric motor gearboxes are maintenance-free, compact power resources for driving vent, display, home and flap ventilation systems in greenhouses.
• Single phase and three phase choices for your own needs.
• Key feature of the drives are a self-braking worm equipment transmission and an integral linear limit switch device.
shaft-installed gear motors are total Greenhouse Gear Motor electromechanical drives in which the speed of the installed electrical motor is reduced to the desired value using two to 4 reduction stages. The drives are high performance and durable and feature a concise and lightweight design.

The compact design is made possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight-loss compared to commercially available drive motors. That is attained through the consistent application of light weight aluminum die casting technology, which ensures a high amount of rigidity for the gear and motor housing simultaneously.

Each drive is produced and tested particularly for every order and customer. A advanced modular system permits a great diversity of types and a optimum degree of customization to client requirements.

Because of their integrated control models, the shaft-mounted equipment motors are the ideal drives for applications in reversing setting. In both rotation directions, defined end positions are safeguarded by two position limit switches. This uncomplicated answer does not only simplify the cabling, but also can help you configure the end positions efficiently. The high shut-off accuracy of the limit switches ensures safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, a power motor, and limit switches. It really is connected with a steel shaft to turn the pinions for greenhouse ventilation. With the support of electric panel, it could run and stop after set number of turns. Then it can open up and close the home windows for greenhouse ventilation to right positions.
To keep up the delicate environment in the greenhouse, climate control systems certainly are a necessity. Several mechanical systems can be applied in this respect; however glass vent drive systems tend to be the most popular. The drive system consists of a central gearmotor connected to a 40:1 correct angle reducer with dual output shafts. These OP shafts connect to lengthy jack shafts that spread across the roof line of the greenhouse connecting to multiple rack and pinion mechanisms that open up and close large glass screen panes in the ceiling for temperature control.
With respect to the size of the application (length of the shafting, amount and weight of the windowpane panes) we offers two gearmotor solutions from a modified edition of their 200 series parallel shaft range – 1/5 HP and 1/20 HP. The application Is generally intermittent in use; however the motors are rated continuous because the glass pane home windows could potentially be under continuous, subtle adjustment during the day.
Gear Motor, also called Motor Gearboxes, is a specific kind of electrical motor that is designed to create high torque while maintaining a minimal horsepower, or low acceleration, motor output. Equipment motors are available in many different applications, specifically for the greenhouse, livestock and agricultural sector, our motors can be found options to operate roof vents, wall vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment mistakes and can be quickly removed without disturbing the whole shaft.
shaft-mounted gear motors are finish electromechanical drives in which the speed of the installed electric motor is decreased to the desired value using two to four reduction stages. The drives are high performance and durable and show a concise and lightweight design.

Contacts

Get In Touch

Interested in our products? Need some technical support? Just have a few questions? Feel free to contact us.

[contact-form-7 id=”57″ title=”Contact form 1″]
X

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.