Your agricultural
parts connection

HK kind roller chains

Downsizing Your System with Larger Electrical power Chains
HK sort roller chains conform to H variety of ANSI, and their thickness of inner and outer link plates are equal to people in the next bigger size chain. As a result, HK sort roller chains are greater in tensile power by about 20%and in greatest allowable load by about 15% than those of normal roller chains. Since the bodyweight of the chains can be bigger, HK variety roller chains are suitable for your application of hefty duty at very low pace.
Suggested uses
?Optimal for places where increased strength is required but huge and heavier chains cannot be made use of.
Choice of chains
Select a proper HK type roller chain depending on “Low-speed selection”
For the highest allowable load, see the next table of dimensions.
HK kind roller chains are available up to triplex.
Sprockets
Use regular sprockets for a simplex HK roller chain Since the transverse pitches are greater than those of regular chains during the situation of duplex or triplex, normal sprockets are not able to be made use of. Refer for the sprocket tooth profiles for HK
Connecting website link and offset hyperlink
The tensile power of connecting links and offset hyperlinks are listed around the left, but the maximum allowable load is reduce than that from the base chain. Please check with us must you might have any inquiries. It can be proposed to make use of the connecting link of interference-fitted (FJ, HJ)
Under no circumstances make the holes with the connecting plate more substantial and in no way make the pins thinner to facilitate the do the job for fitting the pins in to the connecting plate, considering the fact that otherwise the fatigue strength is going to be lowered.
Variety of chains
Select a good HK variety roller chain depending on “Low-speed selection”
For your optimum allowable load, see the next table of dimensions.
HK kind roller chains are available up to triplex.
Sprockets
Use typical sprockets for a simplex HK roller chain Since the transverse pitches are bigger than these of normal chains within the situation of duplex or triplex, normal sprockets are unable to be utilised. Refer for the sprocket tooth profiles for HK
Connecting hyperlink and offset website link
The tensile power of connecting hyperlinks and offset backlinks are listed over the left, however the optimum allowable load is reduce than that of your base chain. Please seek advice from us should really you’ve any queries. It is advised to use the connecting link of interference-fitted (FJ, HJ)
Under no circumstances make the holes on the connecting plate bigger and in no way make the pins thinner to facilitate the get the job done for fitting the pins in to the connecting plate, since otherwise the fatigue power are going to be lowered.

Contacts

Get In Touch

Interested in our products? Need some technical support? Just have a few questions? Feel free to contact us.

[contact-form-7 id=”57″ title=”Contact form 1″]
X

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.