Your agricultural
parts connection

hydraulic planetary drive

Single and double reduction planetary equipment drives to be utilized with electric, hydraulic, atmosphere motors or mechanical power input from high swiftness, low torque sources to provide reduced speeds at increased torques. The input part has regular SAE pads for engine mounting. Available in the three output configurations shown below. Many units could be furnished with an intrinsic parking brake.
Single reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input speed is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Products provide 95% power tranny efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output side has hub for mounting automobile wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is definitely standard on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side includes a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel offers extra-huge tapered roller bearings, a ductile iron hub and temperature treated ring gear to reduce backlash growth caused by wear. The exterior bearing nut provides the ultimate in shaft Plastic Gear Rack retention and shaft strength. Output can be a spindle shaft or numerous sizes of essential pinion gears.

Contacts

Get In Touch

Interested in our products? Need some technical support? Just have a few questions? Feel free to contact us.

[contact-form-7 id=”57″ title=”Contact form 1″]
X

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.