Roots Vacuum Pump

Roots air Ejector Drinking water Ring pump system gives the Air Ejector before Water Band Pump of Roots Drinking water Ring pump system.Comparing to Roots Water Ring Pump system which has the same amounts of Roots pumps,there are the following features;
High vacuum,high displacement in smaller inlet gas pressure
Motor is not reqired for Air flow Ejector,so that zero power consumption;Energy saving
With Air Ejector,the gas pressure difference between input and output has been decreased,which will reduce the comoressing heat and produce the running more reliable for Roots pump.
APPLICATIONS:
Suitble for high vacuum distillng,vacuum vaporizing and vacuum dehydrating-crystalllzation in chemical substance and medicine market;vacuum drying and vacuum impregnation in electric powered and light textile sector;frozen-dryer in meals and medicine market etc.

Roots Pump with Surroundings Ejector and Water Band Pump Vacuum System

Control and communication will be the essential elements for increasing system availability. The intelligent interface technology of the Ever-power allows very good adaptation and monitoring of the procedures. By integrating condition monitoring, information about the condition of the vacuum program is always available. In addition, condition monitoring increases system availability, enabling users to strategy maintenance and repair procedures in a good and anticipatory method and prevents cost-intensive creation downtimes. These advantages lead to a long service life and Air Vacuum Pump china maximum operational safety. ever-power vacuum pumps can either be aligned vertically or horizontally. This allows maximum pumping acceleration and a far more customized and effective utilization of space at the customer’s production site.

The maintenance and energy costs of the HiLobe are more than 50% lower in comparison to conventional Roots pumps. That is due to a drive with energy efficiency class IE4 and the special rotor geometries of the pumps. The pumps are hermetically sealed to the atmosphere and also have a maximum integral leakage rate of 1·10-6 Pa m3/s. Dynamic seals are removed and, as a result, maintenance is only required every four years. A forward thinking sealing concept in the suction chamber makes the utilization of sealing gas superfluous generally in most applications, which also offers a positive influence on the operating costs. Since the operation of the Ever-power Roots pumps is possible even at ambient temperatures of up to over 40°C with flexible air cooling, cost-intensive drinking water cooling is unnecessary.

piston air compressor

What is a piston air compressor?
A reciprocating https://www.ever-power.net/product/piston-oil-free-air-compressor/ compressor or piston compressor is a positive-displacement compressor that uses pistons driven by a crankshaft to deliver gases at high pressure. … The heat exchangers that are found in a standard piston compressor are taken out as the heat is taken out in the cylinder itself where it really is generated.
How does a piston air compressor work?
Like a small internal combustion engine, a typical piston compressor has a crankshaft, a connecting rod and piston, a cylinder and a valve head. … As the piston moves down, a vacuum is established above it. This allows outside air at atmospheric pressure to push open the inlet valve and fill the area above the piston.
What is piston displacement of a compressor?
Piston displacement of the reciprocating compressor may be the volume swept by the piston inside the cylinder in unit period in fact it is same as the capacity of the compressor.
The type of oil does a piston air compressor use?
Typically, compressor manufacturers will recommend a 20 weight or 30 weight (non-detergent) compressor oil. You may use a standard or synthetic mix compressor oil, if the maker states you’ll be able to do so but stick to the manufacturer’s recommendations to avoid voiding the warranty.
Pressure Lubricated Reciprocating/Piston Air flow Compressors
A reciprocating air flow compressor is a positive displacement compressor that runs on the crankshaft-driven piston and cylinder to compress the air. A single-stage reciprocating piston compressor functions by drawing the surroundings in to the cylinder where it really is compressed within a piston stroke of approximately 120 PSI and delivered to a storage container. A two-stage compressor includes an additional step where in fact the atmosphere is compressed by another, smaller piston to a pressure as high as 175 PSI.
QR-25
Our premium, top-of-the-series pressure lubricated piston surroundings compressor may be the QR-25. It’s a heavy-duty compressor that is pressure lubricated in all critical areas and delivers up to 25 hp. Available in solitary- and two-stage versions, the QR-25 is designed to operate at slower speeds and is equipped with intake loaders that reduce work. The rugged cast iron construction ensures a long life expectancy, less downtime and less difficult maintenance. Other important features include loadless starting, a manually reversible essential oil pump and rebuildable components. Viewed as the industry regular in piston compressor technology, the overall performance of Quincy’s ER-25 is legendary.

1-25 hp
3-95 acfm, 20-500 psig intermittent
Single & Two Stage
Cast iron full pressure lubricated

Laser cutting air compressor

9.Motor maintenance.
Based on the motor instruction manual for maintenance.

8. drive belt.
To adjust the amount of tightness every 2000 hours, every 4000 hours to check on the wear and tear, according to wear and tear decide whether to replace.

7, safety valve.
Every 4000 hours to check on if the action is sensitive.

6.Pressure valve.
Clean every 4000 hours, and check if the opening pressure is regular.

because for oil-air flow compressors, the oil-drinking water separator function: separates the oil from the moisture in the surroundings and therefore accumulates over an extended period of time and may affect the filtration effectiveness without the need to replace or clean the oil-water separator

5, oil and gas separator.
Every 4000 hours have to https://www.ever-power.net/?s=laser+cutting+air+compressor&post_type=product replaced a new piece.

Otherwise the oil will make a impact of the cutting effect

4.oil filter.
Every 2000 hours to displace a new piece.

Every 1000 hours need check oil content nonetheless it want to replace the new oil after 4000 hours

Vacuum Pump

Vacuum pressure pump is a gadget that gets rid of gas molecules from a sealed quantity in order to keep behind a partial vacuum. The 1st vacuum pump was created in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.

Vacuum Pumps, pressure pumps, cover a wide range of operating pressures. Laboratory/filtration vacuum pumps are for use in the lab or anywhere a low vacuum is necessary; Air Vacuum Pump china typically give both vacuum and pressure capabilities. Use rough vacuum pumps (or roughing pumps) for laboratory and industrial applications requiring an even of vacuum significantly less than 10-3 Torr. Use high vacuum pressure pumps when you need vacuums greater than 10-3 Torr. Also, consider the free-air capacity needed (the higher the free air capacity, the faster it will evacuate the chamber) and whether you need a lubricated (oiled) or non-lubricated (dried out or oilless) pump. Lubricated pumps provide higher capacities, higher vacuum levels, and lower noise, but can contaminate the system and require even more maintenance.

Industrial Vacuum Pumps
Vacuum Pumps
Our selection of commercial vacuum pumps includes oil-less and oil-flooded choices. We can customize a pump to fit your specific needs and offer you with guidance with regards to choosing the right pump for you. You can expect high-quality, long-lasting outcomes when you choose Becker vacuum pumps.

100% Oil-less Vacuum Pumps
The Ever-power KVT3.60 – 3.140 series pumps are 100% oil-much less rotary vane vacuum pumps made to operate on a continuous basis at any point from atmospheric pressure to vacuum pressure degree of 27” HgV (75 torr). These direct travel units are given a higher efficiency TEFC, C-face, flange mounted electric motor. Each one of these pumps is equipped with an integral vacuum alleviation valve, a 5μ inlet filtration system, and vibration isolators as standard equipment.

Our KVT vacuum pumps have a reputation for being exceptionally calm and the newest version of the pumps are actually quieter and cooler running than previously. Our pumps are award-earning and if you are an OEM, their styling won’t cause embarrassment when included with your product.
Ever-power oilless vacuum pumps are well suited for applications where oil or drinking water is objectionable, including graphic arts, vacuum chucking, packaging, robotics and material handling, air flow sampling, medical and surgical uses, and many others. They use long-existence, self-lubricating graphite composite vanes. These vacuum pumps are also obtainable in several central vacuum system configurations. Pressure and combined pressure/vacuum pumps are available.

Benefits of Ever-power dry out vacuum pumps include:

• 100% Oil-less (dry operation)
• Continuous duty rated
• Operation: Atm. to 27 in.HgV
• Direct drive-no belts; simply no gears
• Low energy consumption
• TEFC motor
• Integral pressure regulating valve
• Integral extra-large 4-micron inlet filter
• Clear filter housing helps inspection
• Vibration isolators
• Quiet operation
• Cool running

Oil-Flooded Vacuum Pumps
The Ever-power U4.70-U4.250 series comprises five models, each available in two versions, including the SA series for general commercial vacuum applications, and the F series, for applications where higher vacuum amounts are needed.

The pumps feature extremely efficient oil-flooded rotary vane designs that incorporate an oil reservoir, multi-stage oil separation system, radiator-style oil-cooler, anti-suckback valve, vibration isolators, and high-efficiency direct-drive motor as standard equipment.

Each of our pumps is designed to are powered by a continuous basis and can be operated with its inlet blanked off. SA series models have an supreme pressure of 2 torr, and so are intended for use at vacuum levels above approximately 20 in. HgV (below 250 torr), but could be operated at any vacuum level, depending on circumstances. F series pumps are greatest for use when the total operating pressure is definitely above 28 in. HgV (below 50 torr). They have an ultimate pressure of 29.9 in. Hg. (0.4 torr).

The U4 series pump is a direct drive unit and is supplied with a High-Efficiency TEFC flange mounted electric engine. We include an initial charge of Becker semi-synthetic oil to ensure the best possible starting for your vacuum pump, and if you are using our oil throughout the full guarantee period and follow essential oil change recommendations, we double your guarantee to two years!

Our U4 series pumps are ideal in situations when high-quantity efficiency is necessary throughout the operating range, such as vacuum chucking, packaging, thermoforming, medical and surgical applications, food processing and packaging, lasers, and molding.

Ever-power maintains four state of the art support centers to meet up our customers’ requirements. All of our technicians undergo a thorough training curriculum to be experienced in the most recent techniques and technologies entering the marketplace. This ensures our clients receive the finest quality service available.

If you want to know more or even to discuss your commercial vacuum pump needs, e mail us.

Vacuum Pump

Vacuum pressure pump is a device that removes gas molecules from a sealed volume in order to leave behind a partial vacuum. The 1st vacuum pump was invented in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.

Vacuum Pumps, pressure pumps, cover a wide selection of operating pressures. Laboratory/filtration vacuum pumps are for use in the laboratory or anywhere a low vacuum is needed; typically give both vacuum and pressure features. Use tough vacuum pumps (or roughing pumps) for laboratory and industrial applications requiring a level of vacuum less than 10-3 Torr. Use high vacuum pressure pumps when you need vacuums greater than 10-3 Torr. Also, consider the free-air capacity needed (the bigger the free air Air Vacuum Pump capability, the faster it’ll evacuate the chamber) and whether you need a lubricated (oiled) or non-lubricated (dried out or oilless) pump. Lubricated pumps provide higher capacities, higher vacuum levels, and lower noise, but can contaminate the system and require even more maintenance.

Industrial Vacuum Pumps
Vacuum Pumps
Our selection of industrial vacuum pumps includes oil-less and oil-flooded choices. We can customize a pump to suit your specific needs and provide you with guidance with regards to choosing the right pump for you. You can expect high-quality, long-lasting results when you select Becker vacuum pumps.

100% Oil-less Vacuum Pumps
The Ever-power KVT3.60 – 3.140 series pumps are 100% oil-less rotary vane vacuum pumps designed to operate on a continuous basis at any point from atmospheric pressure to vacuum pressure level of 27” HgV (75 torr). These direct get units are given a high efficiency TEFC, C-encounter, flange mounted electric motor. Each one of these pumps is equipped with an integral vacuum alleviation valve, a 5μ inlet filter, and vibration isolators as standard equipment.

Our KVT vacuum pumps have a reputation for being exceptionally peaceful and the newest version of the pumps are also quieter and cooler running than previously. Our pumps are award-earning and if you are a OEM, their styling will never cause embarrassment when included with your product.
Ever-power oilless vacuum pumps are perfect for applications where essential oil or drinking water is objectionable, including graphic arts, vacuum chucking, product packaging, robotics and material handling, air sampling, medical and surgical uses, and many more. They use long-lifestyle, self-lubricating graphite composite vanes. These vacuum pumps are also available in different central vacuum system configurations. Pressure and mixed pressure/vacuum pumps can be found.

Benefits of Ever-power dry vacuum pumps include:

• 100% Oil-less (dry procedure)
• Continuous duty rated
• Operation: Atm. to 27 in.HgV
• Direct drive-no belts; simply no gears
• Low energy consumption
• TEFC motor
• Integral pressure regulating valve
• Integral extra-huge 4-micron inlet filter
• Clear filter housing helps inspection
• Vibration isolators
• Quiet operation
• Cool running

Oil-Flooded Vacuum Pumps
The Ever-power U4.70-U4.250 series comprises five models, each available in two versions, including the SA series for general industrial vacuum applications, and the F series, for applications where higher vacuum amounts are needed.

The pumps feature highly efficient oil-flooded rotary vane designs that incorporate an oil reservoir, multi-stage oil separation system, radiator-style oil-cooler, anti-suckback valve, vibration isolators, and high-efficiency direct-drive engine as standard equipment.

Your pumps is designed to are powered by a continuous basis and can be operated with its inlet blanked off. SA series versions have an greatest pressure of 2 torr, and are intended for make use of at vacuum levels above approximately 20 in. HgV (below 250 torr), but could be managed at any vacuum level, depending on circumstances. F series pumps are best for use when the complete operating pressure is above 28 in. HgV (below 50 torr). They have an ultimate pressure of 29.9 in. Hg. (0.4 torr).

The U4 series pump is a primary drive unit and is supplied with a High-Efficiency TEFC flange mounted electric engine. We include an initial charge of Becker semi-synthetic oil to ensure the best possible starting for your vacuum pump, and if you use our oil through the entire full warranty period and follow essential oil change recommendations, we dual your warranty to two years!

Our U4 series pumps are ideal in circumstances when high-volume efficiency is necessary through the entire operating range, such as for example vacuum chucking, packaging, thermoforming, medical and surgical applications, food processing and product packaging, lasers, and molding.

Ever-power maintains four state of the art provider centers to meet our customers’ requirements. All of our technicians undergo a comprehensive training curriculum to be experienced in the most recent techniques and technologies entering the marketplace. This ensures our customers receive the highest quality service available.

If you want to know even more or even to discuss your commercial vacuum pump needs, e mail us.

multi start worm gear

Worm Drive
Worm drives (or worm gear sets) are best angled drives and so are used in screw jacks where the input shaft is at ideal angles to the lifting screw. Other forms of right angle drives are bevel gears, and hypoid gears. Worm drives satisfy the requirements of several systems and provide a compact means of decreasing rate whilst increasing torque and are therefore ideal for use in systems utilising e.g. lifting equipment in which a high gear ratio implies it could be driven by a little motor.
A worm drive contain a worm wheel and worm gear also referred to as worm screw or simply worm. The worm wheel is similar to look at to a spur equipment the worm equipment is in the type of a screw generally with a flank angle of 20°. The worm gear screw could be solitary start or possess multiple starts depending on the reduction ratio of the gear set. The worm has a relatively small number of threads on a small size and the worm steering wheel a big number of teeth on a huge diameter. This mixture offers a wide range of gear ratios typically from 4:1 to 300:1.
The reduced efficiency of a worm drive lends itself to applications that require intermittent rather than continuous use. The worm drive inefficiency originates from the sliding get in touch with between your teeth. Appropriate and adequate lubrication must be applied to dissipate the heat generated and reduce the wear price. For long life the worm equipment it created from a case hardened steel with a ground finish and the worm steering wheel is often created from bronze or cast iron. Other materials combinations are utilized where suitable and in light duty applications contemporary nonmetallic materials are deployed.
Worm Gear Assembly
Multi-Start Threads and Self-Locking
Often a screw system (such as for example that found in a screw jack) is required not to ‘back-drive’ when the holding force is eliminated and an axial load is applied. An individual start multi start worm gear Thread is often used in these circumstances as the shallower helix angle causes higher friction between threads and is usually sufficient to avoid slippage. Such something is reported to be self-locking. This assumes a statically loaded system with little if any vibration as this might cause the friction position to be overcome and the mixture to untighten. In systems that are at the mercy of vibration a fasten or brake is advised to prevent back-drive.
If self-locking isn’t a requirement of a system but a greater velocity of translation is a multi start thread can be utilized. This implies that multiple thread forms are manufactured on the screw shaft.
Single Start Thread: A single helical thread shaped around a screw body. For every 360° revolution of the screw, the proper execution has advanced axially by the pitch of 1 thread. This has the same worth as the pitch. In the case of a single start thread, lead and pitch are equal.
Double Begin Thread: Two thread forms. During 360° revolution the forms progress axially by the combined pitch of two threads. Lead is 2x the pitch.
Triple Start Thread: Three thread forms. During 360° revolution the forms progress axially by the mixed pitch of three threads. Lead is usually 3x the pitch.
Single Start Thread, Double Begin Thread, Triple Start Thread
A multi start thread has a steeper helix angle which results in less friction between the threads and therefore such something is less likely to be self-locking. It follows that a steeper helix allows for quicker translation along the threads i.e. something utilising a multi begin thread can be tightened in fewer rotations than one utilizing a single start thread.
Worms will be the driving equipment in a worm and worm gear set. EFFICIENCY of worm equipment drives depends to a large level on the helix position of the worm. Multiple thread worms and gears with higher helix angle prove 25% to 50% better than one thread worms. The mesh or engagement of worms with worm gears generates a sliding action leading to considerable friction and better loss of efficiency beyond other types of gearing. The usage of hardened and ground worm swith bronze worm gears raises effectiveness, but we’ll make them out of just about any materials you specify. The number of threads on a worm and the number of teeth on a worm equipment will determine the ratio of your established. Ratios are determined by dividing the amount of teeth in the gear by the amount of threads. Typically the number of threads on a worm are 1,2, and 4, but 3, 5, and 6 are out there as well. To determine how many threads are on your worm just look at it from the top where the threads start and count the amount of starts.
Incorporating various multi begin threaded worm shafts in to Ever-Power screw jacks increases the linear output speed range we are able to offer.

worm gear components

The lowest cost and shortest delivery schedules are normally achieved through the use of Worm Gear Components standard worm and gear sets. In addition to using standard shaft center distances, ratios, and bearing mounting parts, designs should include standard bores, flanges, and bolt circles where possible. Since the use of non-standard hubs is not uncommon to the worm gear industry, Ever-power provides for this by having a flanged rim design available for mounting on any adaptable center.
Our metric worm gears come in pairs with worm shafts or worms. They are made of stainless steel, steel, brass or plastic materials. Available in different sizes ranging from module 1 to module 5.
Ever-power manufactures worm gear sets, which are comprised of a worm and worm wheel, for use in a variety of industries including aerospace and military instrumentation, medical, dental, oil and gas exploration, robotics, optical and industrial controls. Our precision worm gear sets can be manufactured to meet the latest AGMA/ISO specifications up to the equivalent of AGMA Q14 per AGMA 390.03.
We offer an extensive selection of precision worm gear set options including:
Right Hand Worm and Worm Wheels
(Left hand available on request)
Anti-Backlash Worm Wheels
Pin Hub and Split Hub Worm Wheels
Browse our selection of stainless-steel worms and bronze worm wheels. We offer many standard sizes and have the design expertise to manufacture custom worm wheels to print. Both our standard and custom worm wheels are available a variety of pitches, diameters, starts and ratios for you to choose from:
Pitch: 48 and 64
Ratios available: 7.5:1 to 360:1
Worm Starts: 1, 2, 4
Wheel PD: 5/8’’ to 5 5/8’’
Bores: 1/8’’ to 1/4’’
Standard Materials offered:
Worms – 303 Stainless Steel; Worm Wheels – Bronze
For custom worm gear sets, we’re capable of providing:
Non-Standard Pressure Angles
Non-Standard Pitches (DP and Module)
Different Ratios/# of starts
Non-Standard Materials
Heat-Treated Worms and Worm Gears
Modified Bores
Sectoring
Face- and Cross-Holes
Milled Features
Assemblies (Cluster Gears)
When it comes to your gear needs, work with the worm gear set manufacturer that has over 15 years of experience: Ever-power.

custom worm gear

Obtainable Size Ranges for Worm Gears:
Maximum Pitch Size / Max 30.0″
Diametral Pitch / From 1.5 to 48 degrees
Face Width / Max 5.0″
Trim Tooth / AGMA Q9

Custom Worm Gear Materials:
Steel
Alloy steel
Brass
Bronze
Copper
Aluminum
Aluminum bronze
Cast & ductile iron
Stainless steel
Phenolic
Nylon/polymer
Tool steel

Worm gears are usually used when large equipment reductions are needed; it is common for worm gears to possess reductions of 25:1 and higher. When constructed correctly, worm gears provide constant, dependable, smooth and quiet running gearing.

We produce gears for many industries, from small to large, in a number of components and size ranges. Avon Gear and Engineering uses state-of-the-art technology, not merely in the manufacturing procedure however in monitoring quality aswell. Our engineers understand that the end end result is only as good as the blank they focus on, therefore we machine our very own blanks to keep the best quality standards.

Ever-Power Gear and Engineering specializes in precision slice worm gears for applications requiring high-ratio speed reduction in a limited space. Our gears and worms are built and manufactured to exacting requirements and specifications. From standard to unconventional, easy to complex, Avon can be capable of producing the best engineered solution for any application.

Ever-Power gets the full production capability of all types of gears. Proud to provide worm and worm equipment sets for customers in all industries. The utmost custom worm gear diameter of the worm equipment can be made 120″, while the size of the worm equipment could be up to 10″. For gears, we can produce tooth and size ratios of up to 1.5 DP and 16 modules. With instant production and scheduling capabilities, we can use our customers to look for the most effective and useful way to manufacture and transfer worm gears and worm models.
Our material options include brass, bronze, stainless steel and grey cast iron. Our complete production capabilities consist of forging, die casting, centrifugal casting and gear and worm cutting by hobbing, broaching, milling or cutting. We may also end the machining of the worm gear and the worm by honing, grinding, shaving or sanding.

Laser cutting air compressor

All Laser Cutters want two additional gadgets which move air flow: blower which removes air / extracts smoke from machine and air compressor as a source for compressed surroundings for so called air assist.

Why and How
Laser cuts by high temperature, very high high temperature focused in tight beam. Side products of high temperature are smoke and fire, both are not welcomed addition, smoke disperses laser reducint it’s efficienty and fire causes charring of material / edges and can even get out of control leading to serious emergency.

Fire needs air flow to burn but it can also die in the event that you blow too hard, think of a candle in the wind. This is essentialy what air assist is for: compressed atmosphere is extruded straight at the laser head in a very tight stream and is fond of where laser touches material.

Pressure and level of air
Pressure of air flow is essential variable for air support efficienty, inside our shop we discovered that optimal worth is between 2 and 3.5 bar (31-50psi).

To accomplish required pressure compressor must push certain level of air through atmosphere assist opening, precise volume depends on size of the starting and desired pressure. High quality laser cutter heads have little and Air Compressor For Tire Production Equipment finely tuned openings while cheaper chinese cutters simply blow generally direction via huge holes.

Proper compressor
When choosing compressor you have to consider if it will be able to constantly provide desired pressure and volume of air. Small airbrush compressors little compressors boast amazing pressure figures but really poor flow rates adequate only for airbrush pistols. Also if small compressor can push enough air it’ll likely overheat in short while.

piston air compressor

Ready to learn more about properly keeping your reciprocating air compressor? Adhere to the link to find out more about oil and maintenance.

Ask your dealer on the subject of our challenging, tougher and toughest piston air compressor choices.

Ever-power’s ER-Series Two Stage Piston Surroundings Compressors are the foundation of work life across an array of industries. With legendary performance and reliability, our compressors are manufactured to meet up the high criteria of workshops and light sector the world over. Ever-power’s complete and flexible range of piston compressors can meet and surpass exacting requirements no matter the job. The ER-Series combines the best quality, performance, and reliability in an affordable package. With a standard 2-12 months complete warranty, we stand by our commitment to providing the very best compressed air gear available. Every ER-Series Two Stage Piston Surroundings Compressor is exactly engineered and includes:
Cast Iron Valve Plates
Cast Iron and Aluminum Construction
Industrial Grade Connecting Rods
Balanced Cast Iron Crankshafts
Industrial Grade Balanced Pistons
Deep Finned Cylinder Heads
Oversized Ball Bearings
EXTENDED LIFE Oil Seals
Our wide variety of Piston Air Compressors comes in a number of configurations to supply flexibility and affordability while remaining well suited to any and every need. Options include:
2-10 HP Electric powered Motors
9-13 HP Gas Driven Motors
11.9-84.8 Displacement CFM
6.5-70 ACFM at 100 psi
13.8-64 ACFM at 175 psi
8-200 Gallon Capacity Tanks
Obtainable optional equipment includes belt guard mounted aftercoolers, electronic or pneumatic tank drains, low level oil switches, and in line filters. Contact the Ever-power SALES FORCE today to find out more about all the available choices and discover how the ER-Series of Two Stage Piston Air flow Compressors could work for you.

4 to 12.4 acfm
110 to 145 psi
Single Stage
We Offer a broad Selection of Piston Air Compressor Parts
Your Quincy Compressor dealer is your one-stop source for all of the reciprocating air compressor parts you need to keep your unit ready to go, whether you need liquid for maintenance, an air compressor piston, pump, belt or other vital part or component
AR Series
Two Stage Horizontal, Vertical, Gas Powered, and Contractor Piston Compressors

0.5-20hp
4-88 acfm, up to 100 psig service
Single & Two Stage
2 ppm carry more than factory certified
Single Stage
Our stationary and Air Compressor For Dairy Equipment lightweight single-stage piston air compressors are ideally fitted to commercial compressed atmosphere applications and smaller sized DIY projects. Despite their little size, they include a tough cast iron structure that ensures maximum resilience. Key product features add a cast iron cylinder and crankshaft, an aluminum head and a completely enclosed belt guard.