We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 various branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
1. HS series slurry pump is created for the steady pumping of higher abrasive, higher density slurries with small servicing requirements. The sporting elements are manufactured of extremely chrome or and rubber. It will sustain substantial effectiveness more than the wear life of its parts.
2. The metal wet elements and rubber ones can be interchangeable for dealing with various liquids or slurries.
three. HS slurry pumps are accessible in dimensions ranging from 1 inch to 18 inch discharge and function substantial effectiveness overall performance capable of flow costs from ten.8 to 5400 m³/h and heads up to 125 meters for substantial head designs.
Attributes:
one. Cylindrical structure of bearing assembly: convenient to adju EPT the area between impeller and EPT liner
and can beremoved comple tel: +86~13 0571 88828y
2. Interchangeable anti-abrasive moist elements produced of substantial-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs give substantial operating stress abilities
and an added measure of safety.
4. The discharge department can be oriented to any eight positions at the interval of 45 degrees
five. Different drive kinds: DC(immediate relationship), V-belt push, equipment box reducer, hydraulic couplings, VFD,
S EPT management, and so forth
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Typical Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Design |
| • Alumina Sector | • Energy Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Product | Max Electrical power (Kw) | Inlet & Outlet measurement (inch) | Substance for Wear Areas | Circulation Rate (Q) | Head (H) meter | Pace (RPM) | Impeller Dia. (mm) | |
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/1 | M | twelve.6~28.eight | 3.5~8 | six~68 | 1200~3800 | 152 |
| R | 10.8~twenty five.two | 3~seven | seven~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | 2/1.five | M | 32.4~seventy two | nine~20 | six~fifty eight | 1200~3200 | 184 |
| R | 25.2~54 | seven~fifteen | 5.5~forty one | 1000~2600 | 178 | |||
| 50HS-C | 30 | 3/two | M | 39.6~86.four | 11~24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36~75.six | 10~21 | thirteen~forty six | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.4~198 | 24~fifty five | 9~fifty two | a thousand~2200 | 245 |
| R | 79.2~a hundred and eighty | 22~fifty | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 40~one hundred | 12~fifty six | 800~1550 | 365 |
| R | one hundred forty four~324 | forty~ninety | 12~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/6 | M | 360~828 | a hundred~230 | ten~sixty one | five hundred~1140 | 510 |
| R | 324~720 | 90~two hundred | 7~49 | four hundred~one thousand | 510 | |||
| 200MS-E | one hundred twenty | 10/8 | M | 666~1440 | 185~400 | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | a hundred and seventy~380 | 11~61 | four hundred~850 | 686 |
| R | 540~1188 | 150~330 | 12~50 | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | seven~sixty eight | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | 7~forty five | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven hundred | thirteen~44 | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven-hundred~1500 | 13~fifty seven | two hundred~400 | 1370 |
| 25HHS-C | 30 | one.5/1 | M | 16.2~34.2 | 4.5~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | three/2 | M | sixty eight.4~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/three | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | six/4 | M | 324~720 | 90~two hundred | 30~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | one hundred thirty~280 | 20~94 | five hundred~a thousand | 711 |
For the material of sporting components,
“M” = metal, extremely chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to contact us any time for details.
Your inquiry will get our prompt attention and reaction !
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic products manufacturer's (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our business and the shown alternative areas contained herein are not sponsored, authorized, or made by the OEM.
