AGKNX Universal Joint for Drive Shaft Wide Angle Joint 36WA 36*89/*32*106 Spare Parts

Introducing the AGKNX Universal Joint for Drive Shaft, a wide-angle joint 36WA 36*89/*32*106 spare part. This robust part comes with a 1-year warranty and is suitable for a diverse range of industries including Hotels, Garment Shops, Building Material Shops, Manufacturing Plants, Machinery Repair Shops, Food & Beverage Factories, Farms, Restaurants, Home Use, Retail, Food Shops, Printing Shops, Construction works, Energy & Mining, Food & Beverage Shops, and Advertising Companies. It offers OEM support and is made of high-quality 20Cr material. The operating angle is both clockwise and counter clockwise. Additionally, the product comes packed in a white single box.

Features of the AGKNX Universal Joint

Our AGKNX Universal Joint is not just a spare part, but a versatile component with a range of significant features. These include:

• A built-in circlip for added strength and durability
• Cross, Cup, and Zerk made from 20 Cr for resistance against wear and tear.
• Rings made from 65 Mn for enhanced performance.
• A seal made from PE for better protection



• Needle made from bearing steel for superior load bearing capacity.

Moreover, we can produce this product to meet your specific needs, making it a perfect replacement for damaged parts on PTO shaft parts.

Applications of the AGKNX Universal Joint

The AGKNX Universal Joint is not just versatile in terms of its use across industries, but also in its numerous applications. These include:

• Power transmission in tractors and farm implements
• Drive shaft parts in various machinery
• Power take-off (PTO) applications
• As a critical component in various agricultural implements
• Use in various types of gearboxes.

PTO Shaft U Joint Replacement Steps

Replacing a universal joint (U-joint) in a PTO shaft involves several steps:

1. Safety First: Ensure that the PTO shaft is completely disconnected from the power source and that the equipment is securely immobilized or supported to prevent accidental movement.
2. Access the U-Joint: Locate the U-joint on the PTO shaft. It is usually situated at the end of the shaft, connected to the driven equipment or implement. Depending on the design, you may need to remove a retaining cap or circlip to access the U-joint.
3. Remove Retaining Hardware: If there are any retaining clips, circlips, or snap rings securing the U-joint to the yoke, carefully remove them using appropriate tools such as pliers or snap ring pliers. Take note of the orientation of any washers or spacers for reassembly later.
4. Separate the Yokes: Gently tap or pry the yokes apart to disconnect the U-joint from the PTO shaft. Be cautious not to damage the yokes or the shaft during this process. If the joint is stubborn, applying penetrating oil or using a suitable press tool may help.
5. Remove the Old U-Joint: Once the yokes are separated, remove the old U-joint from the yokes. This may require pressing out the bearings or using a suitable U-joint removal tool. Take note of the joint's orientation to ensure proper alignment during installation.
6. Prepare the New U-Joint: Ensure you have the correct replacement U-joint that matches the specifications of the original joint. Grease the new U-joint and its bearings according to manufacturer recommendations.
7. Install the New U-joint: Insert the new U-joint into one of the yokes, making sure it aligns correctly with the crosspiece and bearing seats. Carefully align the other yoke with the U-joint and slide the yokes together until they fully engage.
8. Reinstall Retaining Hardware: Securely fasten the U-joint to the yokes using the appropriate retaining clips, circlips, or snap rings. Ensure that the retaining hardware is installed correctly and provides a secure fit.
9. Check for Smooth Operation: Rotate the U-joint by hand to verify smooth movement and proper alignment. Ensure that there is no binding, excessive play, or interference between the yokes and the U-joint.

How to Put U Joint on PTO Shaft?

To install a universal joint (U-joint) on a power take-off (PTO) shaft, follow these steps:

1. Prepare the U-Joint: Make sure you have the correct replacement U-joint that matches the specifications of the original joint. Grease the U-joint and its bearings according to the manufacturer's recommendations.
2. Align the Yokes: Position the yokes of the PTO shaft in a way that allows easy access to install the U-joint. Ensure that the yokes are aligned properly and in a straight line.
3. Insert the U-Joint: Take one of the yokes and align it with the U-joint. Insert the U-joint's crosspiece into the yoke's bearing seats. Ensure that the U-joint fits securely and aligns properly with the yoke.
4. Align the Second Yoke: Align the second yoke with the other side of the U-joint. Carefully slide the yoke onto the U-joint's crosspiece, making sure it engages with the bearing seats. Ensure that both yokes are aligned with the U-joint and fit snugly.
5. Check Alignment: Verify that the U-joint is properly aligned and centered between the two yokes. Ensure that the bearings are seated correctly and that there is no binding or interference between the U-joint and the yokes.
6. Install Retaining Hardware: Securely fasten the U-joint to the yokes using the appropriate retaining clips, circlips, or snap rings. Follow the manufacturer's instructions for the specific type of retaining hardware used in your PTO shaft. Make sure the retaining hardware is properly installed and provides a secure fit.
7. Check Movement: Rotate the U-joint by hand to ensure smooth movement and proper alignment. Verify that there is no binding, excessive play, or interference between the U-joint and the yokes. The U-joint should rotate freely without any obstruction.

Maintenance and Care of the AGKNX Universal Joint

Proper maintenance of universal joints in PTO shafts is crucial to ensure their longevity and reliable operation. Here are some maintenance steps to consider:

1. Regular Inspection: Perform regular visual inspections of the universal joints. Look for signs of wear, damage, or loose components such as worn bearings, rust, or cracks. Pay attention to any vibrations, noise, or unusual movement during operation, as these can indicate potential issues.
2. Lubrication: Adequate lubrication is vital for the smooth operation of universal joints. Follow the manufacturer's recommendations for the type of lubricant and the frequency of lubrication. Apply grease or lubricant to the bearings and crosspiece to reduce friction and prevent premature wear.
3. Cleanliness: Keep the universal joints and the surrounding area clean and free from debris, dirt, and contaminants. Regularly remove any buildup of dirt or grime that may affect the performance of the joints.
4. Retaining Hardware Inspection: Check the retaining clips, circlips, or snap rings that secure the U-joint to the yokes. Ensure that they are in good condition and properly seated. Replace any damaged or worn retaining hardware as necessary.
5. Torque Check: Periodically check the torque of the fasteners that hold the universal joint and yokes together. Loose fasteners can lead to misalignment and premature wear. Follow the manufacturer's recommended torque specifications during reassembly.
6. Alignment: Verify that the universal joint and the yokes are properly aligned. Misalignment can cause excessive stress on the joint and result in premature failure. Adjust and align the PTO shaft and driven equipment as needed.



7. Replace Worn or Damaged Joints: If you notice significant wear, damage, or play in the universal joint during inspection, it is advisable to replace it promptly. Continuing to use a worn or damaged joint can lead to failure and potential damage to other components.

Why Choose AGKNX's PTO Shaft U Joints?

AGKNX Drive Shaft Co., Ltd., located in Hangzhou Zhejiang City, two hours to the Pudong Airport and one hour to the Xiaoshan Airport & the East of Hangzhou Station, Covered more than 12,000 m2 with over 100 people on staff. We specialize in developing, manufacturing, and marketing PTO shafts, agricultural gearboxes, industrial cardan shafts, car driveshafts, u-joint coupling shafts, PTO shaft accessories, PTO shaft tubes, torque limiters, PTO shaft yokes, and PTO shaft universal joints, etc.

The annual turnover is 60 million RMB, 9 Million Dollars, and It??s increasing year by year. Our products gained a great reputation from European, American, Asia, Australian, and North American customers. We are the top professional OEM supplier for many agricultural implement factories in the domestic market.

AGKNX Driveshaft insisted on our principles: Quality first, Deliver quickly, and Price Competitive. We already have the CE, TS/16949, and ISO9001 certificates with systematic manufacturing types of equipment and a QC team to guarantee our quality and delivery. We warmly welcome every friend to visit us and establish a mutually beneficial long-term relationship cooperation.

Currently, our company exports its products to its valued customers in more than 50 countries in 5 continents of the world. Having the best-in-class brands in its product range, AGKNX continues its activities with the aim of becoming a global company in the fields it works.

We pride ourselves on our professionalism, international certifications, customized services, state-of-the-art production facilities, and comprehensive after-sales services. We invite you to experience the quality, reliability, and exceptional performance of our products.

Author: Yjx