P 700 PTO Shaft-Replacement of Walterscheid P 700 PTO Drive Shaft

The P 700 PTO shaft replacement of the Walterscheid P 700 PTO drive shaft is a high-performance agricultural component designed to transfer power efficiently from tractors to various types of agricultural machinery, such as wood shredders, stump grinders, rotary tillers, rotary mowers, and other implements. This PTO drive shaft is equipped with advanced features such as high-strength cross journals, robust yokes, and protective guards to ensure safe and efficient operation. The P 700 series PTO shaft is particularly valued for its ability to handle high torque loads, making it suitable for modern, high-powered tractors and machinery. It often incorporates a wide-angle joint for greater flexibility, allowing it to function smoothly even when operating at sharp angles. Additionally, we provide options for overload or torque limiters and clutches, safeguarding equipment from damage due to excessive loads or mechanical failures.

Note: Our products are replacement parts and not original equipment. We provide perfect replacement products for original equipment. If you need to purchase the original equipment, please contact the original supplier.

Products Specifications

P 700 PTO Drive Shaft Size Chart

P 700 PTO Drive Shaft Tube Size 

1bH	2a	S4LH	S5	S5H	S6

P 700 PTO Drive Shaft Parts Diagram

Number	Parts Name	Number	Parts Name
1	Tractor Yoke	7	Plug, scraper, cap
2	Cross & Bearing Kit	8	Closures for yoke & couplings
3	Grooved Yoke	9	Slip clutch
4	U joint	10	Hexagon head screw
5	Inner Tube	11	Spring washers
6	Roll pin	12	PTO shaft guard

Common Applications of P 700 PTO Drive Shafts

The P 700 series PTO drive shafts find widespread applications across various agricultural settings due to their reliability and robust design. Some common applications of P 700 PTO shafts include:

1. Rotary Tillers: The P 700 PTO drive shafts are widely used in rotary tillers, which are essential for soil preparation in agriculture. The drive shaft efficiently transfers power from the tractor to the tiller blades, ensuring consistent and thorough soil cultivation. Its capability to handle high torque loads makes it ideal for breaking hard soil and mixing organic matter, even under demanding conditions.
2. Rotary Mowers: Rotary mowers, used for cutting grass, weeds, and crop residues, rely on the P 700 PTO shaft for optimal performance. The shaft's durability and smooth power transmission allow the mower blades to operate efficiently, even when dealing with uneven terrain or overgrown vegetation. The P 700 ensures reliability, reducing downtime and maintenance.
3. Wood Shredders: Wood shredders, often used to process tree branches, logs, and other woody materials, benefit from the high torque capacity of the P 700 PTO driveshaft. The shaft’s robust design ensures it can handle the heavy-duty power requirements of shredders, providing consistent and efficient operation while minimizing the risk of mechanical failure.
4. Stump Grinders: Stump grinders require tremendous power to grind down tree stumps into mulch or chips. The P 700 series PTO drive shaft is perfect for this application, as it can reliably handle high stress and torque. Its flexibility and strength ensure smooth and steady power delivery to the grinder head, even during prolonged use.
5. Combine Harvesters: Combine harvesters, critical machinery for harvesting crops, use the P 700 PTO driveshaft to transfer power to various internal components such as the cutting bar, threshing drum, and augers. The drive shaft’s ability to handle complex angles and high torque ensures efficient power distribution, enhancing the harvester’s overall performance and productivity.

How to Replace a Damaged Tractor PTO Shaft in a Stump Grinder?

Replacing a damaged tractor PTO shaft in a stump grinder is a task that requires precision and caution to ensure the safety and proper functioning of the equipment. Here is a general step on how to replace a damaged tractor PTO shaft in a stump grinder:

1. Ensure Safety and Prepare the Equipment: Before beginning any work, turn off the tractor engine and remove the key to prevent accidental operation. Engage the parking brake and disconnect the stump grinder from the PTO shaft. Use gloves and safety glasses to protect yourself. Inspect the area for stability and ensure the stump grinder is on a flat surface to avoid movement during the replacement process.
2. Disconnect the Damaged PTO Shaft: Locate the locking pin or collar mechanism that secures the PTO shaft to the tractor and the stump grinder. Depress the locking mechanism to release the shaft from both ends. If the shaft is stuck, clean debris or rust from the connection points and apply penetrating oil to loosen it. Carefully remove the shaft.
3. Inspect the PTO Connections and Splines: After removing the damaged PTO shaft, thoroughly inspect the tractor PTO output shaft and the stump grinder input shaft. Check for wear, rust, or damage to the splines. Clean the splines with a wire brush and lubricate them lightly with grease to ensure a smooth installation of the new shaft.
4. Select and Prepare a Compatible Replacement Shaft: Choose a replacement PTO shaft that matches the specifications of the stump grinder and tractor, including length, spline size, and torque rating. Extend or collapse the replacement shaft to the correct working length. If the shaft is too long, measure and cut it to size according to the manufacturer’s guidelines, ensuring proper fit and functionality.
5. Install the New PTO Shaft: Attach one end of the new PTO shaft to the tractor’s PTO output. Secure it by sliding it onto the spline and locking it in place using the locking pin or collar mechanism. Repeat the process for the stump grinder’s input shaft. Ensure both connections are firmly secured to prevent disconnection during operation.
6. Test the Shaft and Resume Operation: Before resuming full operation, test the new PTO shaft by running the tractor at a low RPM while the stump grinder is disengaged. Observe the PTO shaft for smooth rotation and ensure there are no unusual noises, vibrations, or disconnections. Once satisfied with the installation, re-engage the stump grinder and resume work. Regularly inspect and maintain the PTO shaft to extend its lifespan.

Why Choose AGKNX's Agricultural PTO Shaft?

AGKNX specializes in developing, manufacturing, and marketing PTO shafts, industrial cardan shafts, car driveshafts, u-joint coupling shafts, universal joints, and more. With an impressive annual turnover of 60 million RMB (approximately 9 million dollars), we are continuously growing year by year. Our products have gained a stellar reputation among customers from Europe, America, Asia, Australia, and North America. We are proud to be among the top three professional OEM suppliers for numerous agricultural implement factories in the domestic market. Our commitment to quality is reflected in our possession of CE, TS/16949, and ISO9001 certifications, alongside a systematic manufacturing setup and a dedicated quality control team to ensure exceptional quality and timely delivery. We warmly welcome every friend to visit us and establish mutually beneficial long-term cooperative relationships.

Our company stands out for several reasons:

1. Safety Shield Types and Colors Based on Your Requirements: We offer a variety of safety shield types and colors tailored to meet your specific needs. Whether you require shields for agricultural or industrial applications, we can customize designs to ensure durability and compliance with safety standards, providing optimal protection.

2. Wide Range of Universal Joints: Our product range includes a comprehensive selection of universal joints for various applications. Designed to ensure reliability and performance, our universal joints are compatible with multiple machines and equipment, delivering smooth operation and reduced wear over time.

3. Large Inventory for Fast Delivery: We maintain a substantial inventory of products, allowing us to provide quick and efficient delivery to meet your deadlines. Our streamlined logistics and stock management systems ensure that you receive the products you need without unnecessary delays.

4. Variety of Abrasives, Tools, and Parts: In addition to shafts and joints, we supply a wide range of abrasives, tools, and components to support your agricultural and industrial operations. Our diverse selection guarantees that you have access to the parts necessary for efficient and seamless workflows.

5. Customization and OEM Support: We specialize in providing highly customized solutions and OEM services tailored to your specific requirements. Whether you need unique designs, branding, or specialized manufacturing, our team works closely with you to deliver products that match your exact specifications.

Choosing AGKNX means opting for quality, reliability, and exceptional service. We are dedicated to meeting the diverse needs of our customers and ensuring that every product we deliver meets the highest standards of excellence.